Zinc Rich Galvanising Coating Galvafroid
Zinc Rich Galvanising Coating Galvafroid
Protects ferrous metals against rust
Suitable as a primer or self finish
Prevents rust creep
Recommended for protection of structural steelwork, agricultural & construction plant & machinery, gates, railings, iron pipework & guttering & the rust prevention of in-situ welding work
Galvafroid has a mid-grey, matt finish
Should not be used on rusty, corroded surfaces or over existing coatings
Should not be used on surfaces in contact with drinking water
Should not be used on surfaces exposed to soft water at temperatures above 60C
Should not be used on surfaces treated with phosphoric acid based rust removers
Should not be overcoated with materials containing strong solvents such as chlorinated & aromatic hydrocarbons, esters & ethers
COVERAGE: 16Mtr Sq/Litre when used as a primer
COVERAGE: 8Mtr Sq/Litre when used as a self finish
Zinc Rich Galvanising Coating Galvafroid
SPECIFICATION:
Volume solids: 40%
Solids by weight: 80%
Zinc content by volume on dry film: 61%
Zinc content by weight on dry film: 90%
Drying times at 20C -
touch dry: 2 hours
hard dry: 24 hours
recoating time: 24 hours min.
Flash points: 41C
DESIGN CRITERIA
When applied as a self-finish Galvafroid should be applied in two coats. One coat when used as a primer. To achieve the correct protection, Galvafroid must be applied on the substrate at the coverage rate recommended.
Zinc Rich Galvanising Coating Galvafroid
Features
Protects ferrous metals against rust
Suitable as a primer or self finish
Prevents rust creep
Recommended for protection of structural steelwork, agricultural & construction plant & machinery, gates, railings, iron pipework & guttering & the rust prevention of in-situ welding work
Galvafroid has a mid-grey, matt finish
Should not be used on rusty, corroded surfaces or over existing coatings
Should not be used on surfaces in contact with drinking water
Should not be used on surfaces exposed to soft water at temperatures above 60C
Should not be used on surfaces treated with phosphoric acid based rust removers
Should not be overcoated with materials containing strong solvents such as chlorinated & aromatic hydrocarbons, esters & ethers
COVERAGE: 16Mtr Sq/Litre when used as a primer
COVERAGE: 8Mtr Sq/Litre when used as a self finish
Specification
SPECIFICATION:
Volume solids: 40%
Solids by weight: 80%
Zinc content by volume on dry film: 61%
Zinc content by weight on dry film: 90%
Drying times at 20C -
touch dry: 2 hours
hard dry: 24 hours
recoating time: 24 hours min.
Flash points: 41C
DESIGN CRITERIA
When applied as a self-finish Galvafroid should be applied in two coats. One coat when used as a primer. To achieve the correct protection, Galvafroid must be applied on the substrate at the coverage rate recommended.
You might also be interested in these items