Zinc Rich Galvanising Coating - Galvafroid

Fosroc
£115.18
£138.22
Stock No:
Available Stock: 69
 
  • Protects ferrous metals against rust

  • Suitable as a primer or self finish

  • Prevents rust creep

  • Recommended for protection of structural steelwork, agricultural & construction plant & machinery, gates, railings, iron pipework & guttering & the rust prevention of in-situ welding work

  • Galvafroid has a mid-grey, matt finish

  • Should not be used on rusty, corroded surfaces or over existing coatings

  • Should not be used on surfaces in contact with drinking water

  • Should not be used on surfaces exposed to soft water at temperatures above 60C

  • Should not be used on surfaces treated with phosphoric acid based rust removers

  • Should not be overcoated with materials containing strong solvents such as chlorinated & aromatic hydrocarbons, esters & ethers

  • COVERAGE: 16Mtr Sq/Litre when used as a primer

  • COVERAGE: 8Mtr Sq/Litre when used as a self finish

  • Galvafroid zinc rich galvanising coating is specifically designed to protect ferrous metals against rust and rust creep. Suitable as a primer or self-finish, Galvafroid is recommended for the protection of structural steel, machinery, iron pipework, railings, guttering, in-situ welding work and much more. Available in a mid-grey, matt finish, Galvafroid zinc coating offers coverage of 16mtr Sq when used as a primer and 8mtr Sq/litre when used as a self-finish. Galvafroid is not suitable for use on: rusty, corroded surfaces, metal with existing coatings, surfaces in contact with drinking water, surfaces exposed to soft water above 60c or surfaces treated with phosphoric acid base rust removers. Avoid over coating with materials containing strong solvents such as chlorinated and aromatic hydrocarbons, esters & ethers.
SPECIFICATION:
Volume solids:40%
Solids by weight:80%
Zinc content by volume on dry film:61%
Zinc content by weight on dry film:90%
Drying times at 20C -
touch dry:2 hours
hard dry:24 hours
recoating time:24 hours min.
Flash points:41C

DESIGN CRITERIA
When applied as a self-finish Galvafroid should be applied in two coats. One coat when used as a primer. To achieve the correct protection, Galvafroid must be applied on the substrate at the coverage rate recommended.
 
You might also be interested in these items
Rust-Oleum 2.5 Ltr - Combicolour - Tool and Fixing Suppliers
Rust-Oleum 2.5 Ltr - Combicolour
Safety Yellow 7348
  • Rust-inhibitive primer & topcoat in...
  • Lead & chromate free
Rust-Oleum Smooth 5 Ltr - Hard Hat Floor Paint - Tool and Fixing Suppliers
Rust-Oleum Smooth 5 Ltr - Hard Hat Floor Paint
Light Grey 7181
  • 7100 Floor Coating can also be applied...
  • 7100 can be applied onto metal floors...
Prosolve Sharpliner - 600ml Spray Paint for Marking Steel - Tool and Fixing Suppliers
Prosolve Sharpliner - 600ml Spray Paint for Marking Steel
Black
  • Available in a wide variety of colours...
Primer - Red - Parkerfast - Tool and Fixing Suppliers
Primer - Red - Parkerfast
5 Ltr
  • Fast Drying
  • Xylene Based
  • High Zinc Content
Primer - Grey - Parkerfast - Tool and Fixing Suppliers
Primer - Grey - Parkerfast
5 Ltr
  • Fast Drying
  • Xylene Based
  • High Zinc Content
Radiator 400ml - Plasti - Kote Spray - Tool and Fixing Suppliers
Radiator 400ml - Plasti - Kote Spray
Satin White 664
  • Provides a durable & professional...
  • Non yellowing formula
Appliance 400ml - Plasti - Kote Spray - Tool and Fixing Suppliers
Appliance 400ml - Plasti - Kote Spray
Gloss White 619
  • Scratch, stain and moisture resistant
  • Non yellowing formula
Loader Image
This website uses cookies. Find out what cookies are and why we use them. If you continue to use this website you consent to cookies being used.