Product Description The fischer threaded rod FTR is a cost-effective system component without approval for the fischer resin capsules RSB and RM II and for fischer injection mortars. For single fixations, the application with the pre-portioned resin capsule is particularly cost-effective. The hot-dip galvanised and zinc-plated steel threaded rods enable extremely diverse applications. The system is particularly suitable for cost-effective fixations indoors where no approval is relevant. The FTR is set with the bonded anchor setting tool and a hammer drill using rotating and hitting motions. During the resin capsule setting process, the capsules are destroyed by the characteristic oblique edge and are mixed, and the mortar is activated.
Features Advantages
The threaded rod FTR is the cost-effective solution for applications with resin capsules where no approval is required.Description
Threaded rod for use with Injection
mortar FIS or 2-component resin capsule
RM.
The resin adheres to the entire surface of
the threaded rod, bonding it to the wall of
the drilled hole..
For pre-positioned installation.
Carbon steel grade 5.8.
Threaded rods are supplied with an
easy-to-use hexagonal installation drive
and a setting tool included in each
package.
Thread diameter 8 to 30 mm.
Zinc-plated steel version for indoor use.
Hot-dipped galvanised version for
temporary outdoor fixings.Specification Applications
Anchorings with resin capsules without approval Anchorings with injection mortars without approval
Building Materials
Suitable for: Non-cracked concrete C12/15
Natural stone with dense structure 